Watts 40 lb. Commercial Restaurant Kitchen Steel Grease Trap

Description

The Watts WD-20-THD 40 lb. grease trap with threaded connections prevents greasy substances from entering plumbing systems, septic fields, and wastewater treatment facilities where they cannot be processed properly and could harm the environment.
Grease traps like the Watts WD-20-THD are often used with cooking or prep sinks, pot sinks, and commercial dishwashers in various types of commercial food service operations.
The Watts WD-20-THD Grease Interceptor features a body constructed of 11-gauge cold rolled steel with an oven-cured, acid-resistant baked gray epoxy coating. Other standard features include a solid steel cover with gasket, a removable baffle assembly, a deep seal trap with cleanout, no hub connections, and an external cast iron flow control fitting (flow restrictor).
The Watts WD-20-THD grease trap has a grease capacity of 40 lb., and a flow rate of 20 GPM. It is PDI (Plumbing & Drainage Institute) Certified, and meets the industry and PDI Standard PDI-G101 for separation efficiency. This standard specifies that the grease trap must maintain 90% separation efficiency up to its rated grease retention capacity.
Overall Dimensions:
24"L x 15 3/4"W x 15"H
Flow Rate: 20 GPM (Gallons Per Minute)
Grease Capacity: 40 lb.
Threaded Inlet & Outlet Size: 3"
Quantity
1/Each
Length
24 Inches
Width
15 3/4 Inches
Height
15 Inches
Capacity
40 lb.
Features
Threaded Connections
Flow Rate
20 GPM
Inlet and Outlet Size
3 Inches
Material
Steel
Type
Grease Traps
Prevents grease from entering plumbing and septic systems
11-gauge cold rolled steel body
20 GPM flow rate and 40 lb. grease capacity
3" threaded inlet & outlet
PDI Certified
This item has been certified by the Plumbing and Drainage Institute (PDI), which promotes the advancement of Engineered Plumbing Products.