Refrigerant Charging Cylinder, 2.5 Lb. Thermal 7003, Charg-Check, R12, R22, R502

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Refrigerant Charging Cylinder, 2.5 Lb. Thermal 7003, Charg-Check, R12, R22, R502
Thermal Engineering Company
Model: 7003
Top Hanging Loop
Professional Refrigerant Charging Cylinder
2.5 Lb. capacity
R12, 44 oz.
R22, 40 oz.
R502, 40 oz.
The Top-Mounted Gauge Reads in R12, R22 & R502
“Completely Refurbished includes warranty.
Tested both in vacuum and 300 psi for a 3 day pressure and vacuum test.
All new valve cores, new gauge that reads in R12, R134a and R22.
New brass caps and valve core tool cap.
Bottom charging on/off valve dissasembled, cleaned seal replaced, and lubricated with Yellow Jacket, o-ring, valve seats and seal lubrication part# 41118.
R12 scale but can be used in both R12 or R134a as the R134a scale is almost identical to R12.
The gauge reads in R12, R134a and R22.”
Tested both in a vacuum and 300 psi for a 3 day pressure and vacuum test.
**Results: Vacuum held and 300 psi held for 72 hours.
A must for any Tech working on a critical charged unit.
Allows you to measure out precise quantities of refrigerant on critical charged equipment.
*****I DO NOT TRUST THOSE ELECTRONIC DIGITAL SCALES FOR THOSE SMALL QUANTITIES OF REFRIGERANT UNITS!
I WANT TO SEE AND KNOW, WHAT I AM PUTTING IN!
Allows you to carry small quantities of refrigerant to the job, yet buy refrigerant in large quantities and keep the drum back at your shop.
Very professional and easily used in the field.
This charging cylinder can hang onto system being charged by means of a top-mounted bail.
Can be calibrated for ambient temperature variations by means of temperature correction chart on the side of the scale.
This is required only if better than 2% accuracy is needed.
Safety relief valve for protection.
Plastic liquid level indicators.
Height: 22"
Thermal Engineering Company Model: 7003 Top Hanging Loop Professional Refrigerant Charging Cylinder 2.5 Lb. capacity R12, 44 oz. R22, 40 oz. R502, 40 oz. The Top-Mounted Gauge Reads in R12, R22 & R502 “Completely Refurbished includes warranty. Tested both in vacuum and 300 psi for a 3 day pressure and vacuum test. All new valve cores, new gauge that reads in R12, R134a and R22. New brass caps and valve core tool cap. Bottom charging on/off valve dissasembled, cleaned seal replaced, and lubricated with Yellow Jacket, o-ring, valve seats and seal lubrication part# 41118. R12 scale but can be used in both R12 or R134a as the R134a scale is almost identical to R12. The gauge reads in R12, R134a and R22.” Tested both in a vacuum and 300 psi for a 3 day pressure and vacuum test. **Results: Vacuum held and 300 psi held for 72 hours. A must for any Tech working on a critical charged unit. Allows you to measure out precise quantities of refrigerant on critical charged equipment. *****I DO NOT TRUST THOSE ELECTRONIC DIGITAL SCALES FOR THOSE SMALL QUANTITIES OF REFRIGERANT UNITS! I WANT TO SEE AND KNOW, WHAT I AM PUTTING IN! Allows you to carry small quantities of refrigerant to the job, yet buy refrigerant in large quantities and keep the drum back at your shop. Very professional and easily used in the field. This charging cylinder can hang onto system being charged by means of a top-mounted bail. Can be calibrated for ambient temperature variations by means of temperature correction chart on the side of the scale. This is required only if better than 2% accuracy is needed. Safety relief valve for protection. Plastic liquid level indicators. Height: 22"
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Refrigerant Charging Cylinder, 2.5 Lb. Thermal 7003, Charg-Check, R12, R22, R502
Thermal Engineering Company
Model: 7003
Top Hanging Loop
Professional Refrigerant Charging Cylinder
2.5 Lb. capacity
R12, 44 oz.
R22, 40 oz.
R502, 40 oz.
The Top-Mounted Gauge Reads in R12, R22 & R502
“Completely Refurbished includes warranty.
Tested both in vacuum and 300 psi for a 3 day pressure and vacuum test.
All new valve cores, new gauge that reads in R12, R134a and R22.
New brass caps and valve core tool cap.
Bottom charging on/off valve dissasembled, cleaned seal replaced, and lubricated with Yellow Jacket, o-ring, valve seats and seal lubrication part# 41118.
R12 scale but can be used in both R12 or R134a as the R134a scale is almost identical to R12.
The gauge reads in R12, R134a and R22.”
Tested both in a vacuum and 300 psi for a 3 day pressure and vacuum test.
**Results: Vacuum held and 300 psi held for 72 hours.
A must for any Tech working on a critical charged unit.
Allows you to measure out precise quantities of refrigerant on critical charged equipment.
*****I DO NOT TRUST THOSE ELECTRONIC DIGITAL SCALES FOR THOSE SMALL QUANTITIES OF REFRIGERANT UNITS!
I WANT TO SEE AND KNOW, WHAT I AM PUTTING IN!
Allows you to carry small quantities of refrigerant to the job, yet buy refrigerant in large quantities and keep the drum back at your shop.
Very professional and easily used in the field.
This charging cylinder can hang onto system being charged by means of a top-mounted bail.
Can be calibrated for ambient temperature variations by means of temperature correction chart on the side of the scale.
This is required only if better than 2% accuracy is needed.
Safety relief valve for protection.
Plastic liquid level indicators.
Height: 22"
Thermal Engineering Company
Model: 7003
Top Hanging Loop
Professional Refrigerant Charging Cylinder
2.5 Lb. capacity
R12, 44 oz.
R22, 40 oz.
R502, 40 oz.
The Top-Mounted Gauge Reads in R12, R22 & R502
“Completely Refurbished includes warranty.
Tested both in vacuum and 300 psi for a 3 day pressure and vacuum test.
All new valve cores, new gauge that reads in R12, R134a and R22.
New brass caps and valve core tool cap.
Bottom charging on/off valve dissasembled, cleaned seal replaced, and lubricated with Yellow Jacket, o-ring, valve seats and seal lubrication part# 41118.
R12 scale but can be used in both R12 or R134a as the R134a scale is almost identical to R12.
The gauge reads in R12, R134a and R22.”
Tested both in a vacuum and 300 psi for a 3 day pressure and vacuum test.
**Results: Vacuum held and 300 psi held for 72 hours.
A must for any Tech working on a critical charged unit.
Allows you to measure out precise quantities of refrigerant on critical charged equipment.
*****I DO NOT TRUST THOSE ELECTRONIC DIGITAL SCALES FOR THOSE SMALL QUANTITIES OF REFRIGERANT UNITS!
I WANT TO SEE AND KNOW, WHAT I AM PUTTING IN!
Allows you to carry small quantities of refrigerant to the job, yet buy refrigerant in large quantities and keep the drum back at your shop.
Very professional and easily used in the field.
This charging cylinder can hang onto system being charged by means of a top-mounted bail.
Can be calibrated for ambient temperature variations by means of temperature correction chart on the side of the scale.
This is required only if better than 2% accuracy is needed.
Safety relief valve for protection.
Plastic liquid level indicators.
Height: 22"