Life Saver Pool Fence DG DIY Drill Guide Removable Mesh Safety Fence for Pools

Description

For use with the Pool Fence DIY backyard pool safety system
Makes it easy to accurately and consistently drill required holes in concrete
Takes the guesswork out of the drilling process; includes attached bubble level
Installation requires a rotary hammer drill with a standard 5/8-inch x 14-inch (minimum) masonry bit (not included).
From the manufacturer
Pool Fence DIY by Life Saver
A family owned and operated company based in Delray Beach, FL, Life Saver has been has been keeping little feet on solid ground since 1987.
Drill Guide with Bubble Level
For use with the Pool Fence DIY pool safety system from Life Saver, the Drill Guide makes it easy to accurately and consistently drill required holes when installing fence panels and gates from the do-it-yourself backyard pool safety system.
It takes the guesswork out of the drilling process for proper in-ground installation, and it features an attached bubble level. Installation requires a 1/2-inch (minimum) rotary hammer drill with a 5/8 x 14-inch (or longer) concrete drill bit.
More from Pool Fence DIY by Life Saver
Easy-to-install, do-it-yourself pool fencing helps keep children safe; available in 12-, 48-, and 72-foot sections
The self-closing, self-latching gate has a 2-foot walk-through opening and recommended height of 4 feet.
An extra peg pole is handy when an additional pole is needed, such as 90 degree turns or when following the pool’s exact contours.
Replacement sleeves and caps for poles with 1/2-inch stainless steel pins; set of 5 in gray or tan
Set of two hooks for hooks for hanging towels and more; easily installs by removing existing pole cap