Dwyer 2001 Magnehelic Differential Pressure Gauge (0-1.0"w.c.)

Description

Untitled Document
Dwyer 2001 Magnehelic Differential Pressure Gauge (0-1.0"w.c.)
Model:
2001
| Order No:
2001
Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
Brand:
Dwyer
Model:
2001
Order No:
2001
Condition:
NEW
Description
Dwyer 2001 Magnehelic Differential Pressure Gauge (0-1.0"w.c.)
Dwyer 2001 Magnehelic Differential Pressure Gauge range 0-1.0
The Dwyer 2001 Differential Pressure Gauge Features a range of 0-1.0" w.c. and minor divisions of .02.
Select the Magnehelic® gauge
for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic® gauge movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.
The Magnehelic® gauge is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.
Note:
May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Included
Dwyer 2001 Magnehelic Differential Pressure Gauge (0-1.0"w.c.)
Specifications
Service
Air and non-combustible, compatible gases
May be used with hydrogen
Pressures must be less than 35 psi
Housing
Die cast aluminum case and bezel, with acrylic cover
Exterior finish is coated gray to withstand 168 hour salt spray corrosion test
Accuracy
±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM
±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C)
Pressure Limits
-20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar)
MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar)
Enclosure Rating
IP67
Overpressure
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only
Temperature Limits
20 to 140°F (-6.67 to 60°C)
-20°F (-28°C) with low temperature option
Mounting Orientation
Diaphragm in vertical position
Process Connections
&frac18" emale NPT duplicate high and low pressure taps - one pair side and one pair back
Dimensions
4" (101.6 mm) diameter dial face
Terms & Conditions
Item Condition:
Unless specified otherwise all products listed are Brand New in the original factory packaging and include a full factory warranty.
Shipping:
We currently only ship to U.S. buyers. We ship items within one or two business days from payment. We do not process shipments on weekends and holidays. Local pick up is not available. We only ship to addresses verifiable by either PayPal or credit card issuing bank.
Please note that we cannot alter the address once a purchase is made. In the case of PayPal payment, we will ship orders when the payment is marked “Eligible” for PayPal Seller’s protection.
*Shipping Rates are for Continental US, Please Contact us for other US Destinations
Payment:
Currently all payments must be made directly though PayPal
Sales Tax:
We are required to charge sales tax in North Carolina
Return Policy:
If for any reason you are not 100% satisfied with a product you receive from us, you may return the regular stock product within 30 days from the time of receipt, for a full refund or exchange of the product you purchased (less any shipping costs). Within this time, products may be returned; freight prepaid and must be in their original packaging and in resalable condition.
Shipping errors, missing items or damages must be reported to us immediately (damages should be accompanied by a signed bill of lading acknowledging the damage). Items returned will be inspected for damage or misuse at which time they may be subject to restocking fees, other fees or refused, prior to the issuance of any credit.